How To Turn Off Buzzer on Maytag Dryer

Maytag dryers are a reliable appliance in any home. But sometimes, their loud buzzing noise can be annoying and even disruptive. Could you be wondering how to turn off the buzzer on your Maytag dryer?

In this article, I’ll guide you through these steps clearly and concisely so you can successfully complete the task without any hassle or needing professional help. But first, let’s get the importance of that buzzer out of the way.

Why Your Maytag Dryer Has a Buzzer

Of course, that buzzing sound of your dryer can ruin your peace of mind and the serenity of your home.

But have you ever figured out why your dryer has this annoying buzzer in the first place?

Could it be that the manufacturer aims to irritate you?

The answer is: No.

The buzzer on your Maytag dryer is actually there for your benefit. It alerts you that the dryer has finished its cycle, so you can unload your laundry without worry.

So in a way, it is a helpful feature.

Leaving your clothes long in the dryer after the cycle has finished can cause wrinkling and shrinking in some fabrics. That’s why you should permanently remove the clothes immediately after the cycle is over, and a buzzer is there to alert you when that time comes!

Without the alert feature, you’d have to keep checking your dryer from time to time to see if it is done, which can be quite tedious and won’t allow you to concentrate on other activities.

But then again, that’s not to downplay the fact that this alert feature can be quite disruptive to you and your family. And if that’s why you’re here, then you’re just about to discover how to disable it and save you and your family from the noise-induced headache.

Now, let’s get started with the steps!

Step-by-Step Guide to Turning Off Buzzer on Maytag Dryer

Here are the steps to get rid of that incessant buzzing sound once and for all:

Step 1: Gather the Tools for the Job

Like any other DIY project, you’ll need a few tools to complete this task. Ensure that you have all of the following necessities before tackling the project:

• Phillips Screwdriver
• Electric Tape
• Wire Cutters

These are just some of the basic tools that you’ll need. You may require more tools depending on the exact model of your dryer.

Step 2: Unplug the Dryer

For safety reasons, it is important to unplug your Maytag dryer before you start tinkering with the internal components of your machine.

Don’t just switch it off using the power button. You’ll need to unplug the dryer completely from the power source to avoid getting an electric shock while working on it.

You can also opt to cut the power supply from the breaker. You want to ensure the dryer is completely powered down before moving to the next step.

Step 3: Remove the Back Access Panel

After unplugging the dryer, carefully remove the back access panel. This will afford you a better look at the inside of the machine and locate the buzzer.

Be gentle and use the screwdriver to loosen and remove the screws keeping the panel in place. Once all the screws are off, put the panel aside and proceed to the next step.

Step 4: Locate the Buzzer

Now, with the back panel off, you should be able to spot the buzzer easily. It is usually located next to the timer and is a small black plastic box with two wires going into it.

The colors of the wire may differ from model to model. But for most models, the two wires will be pink and gray. Don’t worry if you can’t spot anything of this color in your model.

Even without the colors, you should be able to locate the buzzer if you know where your dryer’s timer is at the back of the control panel.

Step 5: Disconnect the Wires Going Into It

Once you have located the buzzer, disconnect the wires that go into it. A firm and careful tug should do the trick.

However, if you don’t feel comfortable disconnecting the wires, you can use a wire cutter to cut off the wires going to the buzzer.

Once you’ve pulled or cut the wires, use electric tape to insulate the wire ends for safety’s sake. Left uninsulated, the wire ends may spark after you turn the unit back on and cause a fire.

Step 6: Reattach the Back Panel

Now that the buzzer is disconnected from your dryer, you can reattach the back panel by reversing the steps used to remove it.

Ensure all screws are tight and there are no gaps between the back panel and the walls of the dryer.

Step 7: Plug the Dryer Back In

After reattaching the back panel, you can now plug the dryer back in and turn it on.

You should notice that the buzzer is now turned off, and you can enjoy the dryer’s cycles without any disruptive noises!

Why Maytag Dryer Buzzer Won’t Shut Off

Sometimes, even after the cycle has ended, the dryer buzzer may continue to beep. This problem can be attributed to either of the following:

• Faulty Timer.
• Defective centrifugal switch.
• Broken or Burnt wires.

Let’s look at each of these causes and how to solve them.

Faulty Timer

In most modern dryers, the buzzer is connected to the timer. That’s how it gets to know when it’s the right time to beep in the first place.

However, if the timer is faulty, it can cause a lot of trouble to the buzzer and other connected components, including the buzzer refusing to shut off even after the cycle has ended.

In such a scenario, it is best to contact a professional technician and have them check the timer. They should be able to get it back in working condition with a few turns of a screwdriver or by replacing the whole part.

Defective Centrifugal Switch

If you’re using one of the older Maytag dryers, chances are that the timer doesn’t directly control the buzzer. Instead, it is connected to the centrifugal switch inside the motor.

This switch is responsible for activating the buzzer when the cycle is completed. If it’s defective or worn out, it can fail to shut off the buzzer even after the cycle has ended.

Also, in this case, you’ll have to contact a professional technician who can repair or replace the switch depending on its condition.

If it turns out that replacement is the only viable option, then you’ll need to replace the whole motor since the switch doesn’t come independently.

Broken/Burnt Wires

The buzzer can also refuse to shut off due to a broken or burnt wire, especially one of those connected to the heater.

If you suspect that one of the wires is broken or burnt, you’ll need to contact a professional technician who will take care of it.

They’ll be able to take a closer look at the wires and fix any broken or burnt ones if needed. If it turns out that the issue isn’t with the wiring, then they’ll be able to identify the actual problem and fix it.

Why Maytag Dryers Make Humming Noise?

You might have noticed that your Maytag dryer makes a humming noise when it’s running and wondered why that is.

Well, the reason for this usually isn’t anything to worry about. It’s just the motor or other internal components making that noise as they move and work together during a cycle.

However, if you notice that the humming sound is getting louder with days, that’s a tell-tale sign that something isn’t right. In such a scenario, it’s best to contact a professional technician and have them check the unit for you.

In most cases, loud humming noise signals a failing motor. But that’s just one of the possibilities, so it’s always best to contact a technician for a thorough check.

Conclusion

While it’s a helpful feature, the buzzers on Maytag dryers can sometimes be a nuisance. It’s even more annoying when it refuses to shut off after the cycle is completed.

But don’t worry! Whether your buzzer is functioning normally but just finds the noise too distracting or it’s refusing to shut off, you can use the above-mentioned methods to turn it off.

Just make sure you use the right tools, take safety precautions, and contact a professional technician if needed. That way, you can enjoy your Maytag dryer without any disruption.