Home Appliances

How To Get Dents Out of Stainless Steel Appliances

Fridge Dents
Fridge Dents Source: missyward

Do you love to have a contemporary industrial look in the kitchen? If yes, opting for stainless steel appliances is the way to go.

These devices are durable and resistant to several forms of wear and tear. You do not need hours or fancy equipment to clean them as a single piece of cloth can easily clean the surface and make them look as good as new.

However, no matter how hard you try, your appliance can get dented if you have kids at home or a careless partner who likes to shut the refrigerator door with a bang. They appear flawed, and it lowers their selling price and value.

So it is better to act promptly and fix any depletion before it’s too late.


There are several ways to get the dents out of your stainless steel appliances. A few common and easy ways to get the job done are:

  • Hot and cold treatment.
  • Manually pushing them.
  • Calling the paintless dent repair specialists.

Does looking at your dented refrigerator door bother you? Read further as we discuss tried and tested ways to get the dents out of your stainless steel appliances and make them look brand new.

6 Ways To Get the Dents Out of a Stainless Steel Appliance

Dents are heartbreaking, and honestly, nobody likes the sight of them. Whether you have a dented fridge door or washing machine, there are several easy ways to get it out and make your device look flawless.

Let’s have a look:

1. Manually Pushing It

Closeup Of A Man Sets The Handles To A New Refrigerator With A Screwdriver.

One of the easiest and simplest ways to get a dent out of your stainless steel appliance is to push it manually using your bare hands. It is an effective way that is only possible for removable parts of the device.

A Disclaimer: Pushing back the dents only works for more minor, lighter dint. If you have a substantially visible mark on your appliance, pushing it back won’t be much helpful.

2. Hot and Cold Treatment

Hand Male Holding Up A Heat Gun On White

You must have read about the famous hot and cold treatment for your dents. It is a foolproof trick that can do wonders.

Metal can expand or compress as per the temperature. You can heat your surface and apply a cold substance to get the dent out.

Here’s how to do it:

  1. Take a heat gun or a hair dryer and move it around the dented area to expose it evenly to a hot temperature.
  2. Mostly, the heat is enough to get the dent out, as the metal will expand after the exposure.
  3. If it doesn’t remove the mark, try applying cold objects like canned air or dry ice to compress the surface.
  4. You can try this trick a few times until you feel a smooth surface.

3. Call a Dent Repair Specialist

Concentrated Blue Eyes Sight Of Young Repair Specialist Leveling Harmed Car Detail Using Rubber Hammer Intently Aim Moving

A dent repair specialist is an expert that takes out dents from car doors. You can use the services for your stainless steel appliances as well. These experts have special rods that help remove the dip from the surface and make it smooth again.

All you need to do is disassemble the dented part and let them handle the rest.

A Disclaimer: Dent repair specialists can only work on removable parts. If your appliance has a vinyl covering coated with stainless steel, the dent specialist won’t be able to fix it.

4. Use a Suction Cup/Plunger

Green Suction Cup

Everyone has a plunger at home for unclogging washrooms and pipes. It is also an excellent source of removing dents from your stainless steel appliances.

Here is how to do it:

  1. Pour water over the dented area and place a suction cup or plunger on the dent.
  2. Try pressing the cup over the center of the depletion to create a strong seal.
  3. Pull the suction cup; it should remove the dent and make your surface even.

5. Use a Car Dent Puller

Process Of Paintless Dent Repair On Car Body. Technician S Hands With Puller Fixing Dent On Rear Car Fender. Pdr Removal Course Training

A car dent puller is a tool that helps to remove the dents from your car’s bodywork. You can also use it to fix your dented stainless steel appliances.

There are mainly two types of dent pullers:

  1. Suction dent pullers work like plungers. You can attach it to the dent and pull it up to remove the depletion.
  2. The glue dent puller sticks a flat pulling tab onto the surface. The tab has a screw that helps remove the dent while pulling the surface.

6. Go for a Dent Remover Kit

Paintless Dent Repair Kit Tools Set On The Work Table. Tools For Repair Dents On Car Body. Glue Tabs With Slide Hammer.

You can also find a dent remover kit at hardware stores which is an ideal solution for minor dents. These kits have suction rigs that work like plungers and pull out the dints.

As every dent remover kit is different, it is advisable to refer to the manufacturer’s manual for proper usage.


Stainless steel appliances are durable and trendy. They make your kitchen look modern and add a touch of class as well. However, a small dent in your device can damage its overall appearance.

It is better to act fast and use the methods mentioned above to eliminate the depletion as soon as possible. If you cannot fix the problem, it is better to consult an expert or replace your appliance, as repairing it can be more costly in the long run.

Leave a Comment

Your email address will not be published. Required fields are marked *