If your clothes are not coming out as clean as they should, or you have noticed increased water levels during a cycle, it might be time to look at the dirty washing machine filter.
While cleaning your whirlpool washing machine’s filter may seem daunting, it is quite easy and can be done in eight simple steps!
Remember to take regular precautions, avoid overloading the machine, and use the correct detergents and softeners.
Ensure you clean away any lint or residue that builds up in the filter to make sure your washing machine works at its peak.
It is recommended to clean the whirlpool filter every three months or so and change it if necessary.
To do this, follow the steps outlined in this guide and refer to your owner’s manual for more detailed instructions.
With a few basic tools, such as a screwdriver and a toothbrush, you can save yourself from a costly repair bill and keep your clothes looking their best. Follow this guide to learn how to clean a whirlpool washing machine filter in no time.
Get Your Whirlpool Washing Machine Filter Sparkling Clean With These Steps
Without further ado, here are the steps you need to take to get your whirlpool washing machine filter cleaned:
Step 1: Unplug Your Washing Machine
Before you do anything, unplug your washing machine from the power source. Doing this will help prevent an electric shock if you accidentally touch a live wire.
Step 2: Locate the Filter
To locate your filter, you will need to locate the water inlets on your washing machine. On most machines, this is located at the bottom right corner of the machine.
If you cannot find it, consult your owner’s manual or give your machine a quick look to locate the filter.
Step 3: Remove the Filter Cover
The filter will typically have a rectangular or circular cover that needs to be removed.
When you have located the filter, hold the cover and turn it counterclockwise until it comes off.
In some cases, these covers can be tricky to remove as they are child-proof and require a tool such as a screwdriver to pry them off.
Step 4: Pull Out the Filter
Once you have removed the cover, you can pull out the filter.
If it gets stuck, try to wiggle it around a bit to loosen it up. You may also need to remove the draining hose if it blocks access to the filter.
Note: Before pulling out the filter compartment, place a cloth under the opening to prevent water from spilling.
Step 5:Clean the Filter
The filter will typically have debris and lint built up that must be removed.
To do this, you will need a soft toothbrush or cloth and some warm water. Dip the brush in warm water and gently scrub away any dirt or debris from the filter.
Then, rinse off the filter with clean water to make sure all the waste is removed.
Step 6: Replace the Filter
Once you have finished cleaning your whirlpool filter, it’s time to put it back in its place.
Make sure to line up the tabs on the filter with the slots on the machine before inserting them. Once you have done this, you can replace the filter cover.
Step 7: Turn On the Water Supply
Once your filter is secured with its cover, you can turn on the water supply. This will allow clean water to start flowing through your machine again.
Step 8: Test Your Machine
After completing these steps, it is a good idea to test your machine to ensure it’s working properly.
You can do this by running a short cycle with an empty load of towels or clothes. This will help to make sure your machine is functioning correctly.
- Only use non-abrasive cleaning solutions to clean your filter.
- Properly secure the filter cover before operating your machine. Failure to do so could damage the washing machine or risk electric shock.
- Always consult your owner’s manual to ensure you follow the correct steps for your model.
How To Prolong the Life of Your Whirlpool Washing Machine
In addition to regular maintenance, you can also do a few things to ensure your washing machine lasts for years to come.
- Regularly check the hoses and connections for wear and tear and replace them if needed.
- Avoid overloading your machine, as this can put extra strain on it.
- Be careful with the detergents and softeners you use—some can damage the internal parts of your machine if used in excess.
- Store your machine in a cool, dry location away from direct sunlight, which can damage the machine over time.
Conclusion
There you have it! You now know how to clean a whirlpool washing machine filter in eight simple steps.
If your clothes still don’t look as clean as they should, you may need to try a stronger cleaning solution, such as vinegar or baking soda.
However, following these steps can help to keep your washing machine running in peak condition, saving you time and money.
If you ever run into an issue with your machine, you can always refer to this guide for help.
Frequently Asked Questions
How Often Should I Clean My Washing Machine Filter?
It is recommended that you clean your filter every three to six months, depending on usage. However, if you notice any blockages or build-up, it’s best to clean the filter as soon as possible.
Can I Use Bleach To Clean My Filter?
No, it is not recommended to use bleach to clean your filter, as it can damage some parts of your machine. It is best to use a mild cleaning solution and warm water.
What Should I Do if My Washing Machine Is Still Not Working Properly After Cleaning the Filter?
If your washing machine is still not working properly after cleaning the filter, it is best to contact a professional technician for assistance.
They will be able to diagnose any potential issues and help you get your machine back up and running.
Should I Replace My Filter if It’s Worn or Damaged?
Yes, it is best to replace the filter if worn or damaged, as this can cause further problems with your machine.