Ecovac’s line of Deebot robot vacuums is one of the most popular on the market. Designed to clean your space with zero supervision and intervention, these trusty appliances streamline domestic maintenance.
But just like any other electronic, Debbot vacuums can malfunction now and again.
Fortunately, many errors you encounter with your Deebot vacuum should be easily resolved with a simple hard reset. But how exactly do you reset a Deebot vacuum?
Here’s a step-by-step guide:
- Deebot vacuums may run into minor errors and malfunctions that require a reset.
- Some units let you perform the reset with a dedicated button, while others require pressing the on/start button.
- You can try power cycling the unit if a reset doesn’t work.
- In more serious cases, a reset might not solve your issue. Don’t hesitate to have your unit serviced.
You might be tempted to surrender your Deebot vacuum for servicing in the face of errors and malfunctions. And while that may help, you should consider resetting the system first. Sometimes, minor bugs can cause your Deebot vacuum to malfunction, but rebooting the unit could help restore proper performance.
How To Reset a Deebot Vacuum
If your user manual is available, you should check its instructions first. Deebot vacuum models often use different steps for a reset.
Depending on your model, you should follow a unique set of steps. If you don’t have your manual, here’s what you can try.
1. Models With a Dedicated Reset Button
The reset button on most Deebot vacuums is usually positioned beside the power button. The small reset button sits in a recessed hole, so press a pen or a similar item.
To reset your Deebot vacuum, here’s what you need to do:
- Turn the unit ON.
- Find a small pin or needle fitting into the reset button’s hole.
- Press down on the reset button and hold for 6 seconds or until the unit beeps three times.
- Turn off the unit.
- Place the Deebot vacuum back in its base.
- Please wait 30 seconds to 1 minute before turning it back on.
- Check to see if the reset resolved your issue.
2. Models Without a Reset Button
Different Deebot vacuum models can vary in design, so it’s possible that your vacuum doesn’t have a reset button. In this case, the POWER button will serve the purpose of a reset button.
Here’s how to perform the reset:
- Turn the Deebot vacuum on.
- Press and hold the START/ON button for 6 seconds or until the vacuum beeps thrice.
- Turn the unit off and return it to its base.
- Wait 30 seconds to 1 minute before turning it back on.
- Check to see if the issue has been resolved.
3. Power Cycle
If resetting your Deebot vacuum doesn’t work, you can try performing a power cycle. This method entails removing the power source to reboot the unit.
- Turn your Deebot vacuum OFF.
- Locate the battery housing underneath the unit.
- Open the battery compartment and remove the battery.
- Wait 1-2 minutes before replacing the battery and turning the unit on.
If none of these solutions worked for you, then your Deebot vacuum might face more serious issues that a simple reset can’t resolve.
Don’t hesitate to have your unit serviced, especially if it’s still under warranty. Avoid DIY fixes that entail opening the vacuum, as this may void your coverage.
Summary
Like any other electronic, your Deebot vacuum might run into performance errors during operations. Instead of handing it in for servicing, try a simple reset first.
You could resolve minor bugs by rebooting the robot vacuum and returning it to seamless working conditions.
Frequently Asked Questions
Why Is My Deebot Beeping and Blinking Red?
If your Deebot has stopped moving, started beeping, and is blinking red, the unit has a low battery to return to its charging base.
You only need to manually carry the vacuum back to its base to charge.
How Do I Reset My Deebot Battery?
This method works only for certain models. If your battery has been discharged, you can get it back to proper functioning by following these steps:
- Manually place the Deebot vacuum in its base.
- Remove the unit after a 3-minute charge, and then put it back.
- Repeat the previous step three times.
- Place the Deebot in its base and charge it normally.
