Home AppliancesDryer

How To Fix a Dryer Drum

Dryer 7

When your dryer drum isn’t spinning properly, it can be a major inconvenience. But don’t worry, you don’t necessarily need to buy a new dryer just yet. With the right knowledge and a little bit of patience, you can fix your dryer drum yourself. Let’s dive into the common reasons for a dryer drum not turning and how to fix them.

KEY TAKEAWAYS

To fix a dryer drum, first identify the problem which could be due to a broken drive belt, faulty motor, defective start switch, or a clogged vent among other issues. Gather necessary tools like a putty knife, screwdriver, nut driver, replacement parts, and epoxy glue. Then, fix the problem by replacing or repairing the faulty component. Remember to unplug your dryer before starting the repair. After fixing, reassemble your dryer and test it to ensure it’s working properly.

Common Dryer Drum Issues

Several problems could cause your dryer drum to malfunction. These issues range from a broken drive belt and faulty motor to a defective start switch or timer. Other problems include a clogged vent, worn drum rollers, and a damaged drum bearing.

Identifying the Problem

Before you can fix the issue, you need to identify what’s causing it. Start by checking the basics. Ensure the dryer is plugged in, the door is properly closed, and the control panel settings are correct. Next, inspect the drive belt and listen for unusual noises, which might indicate a problem with the drum seal and glide bearing. Also, check the drum rollers and axles for any signs of wear or damage.

Necessary Tools and Materials

To fix a dryer drum, you’ll need a few tools and materials. These include a putty knife, a Phillips screwdriver, a 5/16-inch nut driver, replacement parts (if necessary), and epoxy glue or JB Weld for a cracked drum.

Fixing Common Problems

Now that you’ve identified the issue and gathered your tools, it’s time to fix the problem. Here’s how to address the most common dryer drum issues:

  • Drive Belt: If the drive belt is broken or has slipped off, replace it.
  • Motor: If the motor is malfunctioning or burnt out, replace it.
  • Start Switch or Timer: If either of these is defective, replace it.
  • Vent: If the vent is clogged, clean it out.
  • Drum Rollers and Axles: If these are worn or damaged, replace them.
  • Drum Seal and Glide Bearing: If these are damaged, replace them.
  • Door Switch: If this is faulty, replace it.

Remember to always unplug your dryer before attempting any repairs.

Reassembling Your Dryer

After repairing your dryer drum, it’s time to reassemble your dryer. Make sure the drum is properly seated and aligned with the drum bearing and rollers. Reinstall the drum belt, reattach the front panel, reconnect any wiring harnesses, lower the top panel, and reconnect the dryer vent hose. Finally, plug the dryer back into the power source and test it to ensure proper operation.

Preventing Future Issues

To avoid future dryer drum issues, follow these maintenance tips:

  • Clean the lint filter after every load.
  • Wipe the dryer drum regularly.
  • Avoid overloading the dryer.
  • Inspect and replace worn components.
  • Clean the dryer vent regularly.
  • Keep the dryer level.
  • Listen for unusual noises.

By following these steps, you can fix a malfunctioning dryer drum and prevent future issues. However, if the problem persists, don’t hesitate to call a professional. Dryer repairs can be complex, and a professional can ensure the job is done correctly and safely.

For more guidance, check out these helpful videos:

  1. “Quiet Your GE Dryer: A Step-by-Step Guide to Replacing Drum Bearings and Glides”
  2. “How To Fix A Cracked Dryer Drum”
  3. “How To: Samsung Dryer Drum Assembly DC97-14849H”

Remember, a functioning dryer is crucial to maintaining a smooth-running home. With these tips, you’ll be well-equipped to tackle any dryer drum issues that come your way. Happy repairing!

Frequently Asked Questions

How long does it take to fix a dryer drum?

The time it takes to fix a dryer drum varies depending on the issue at hand. A simple problem like a slipped drive belt can be fixed in less than an hour. However, more complex issues like a burnt out motor might take a few hours to fix, especially if you need to wait for a replacement part.

How do I know if the drive belt is broken?

The drive belt wraps around the dryer drum and motor pulley, providing a path for the drum to spin. If the belt is broken, it might be visibly damaged or completely detached. Additionally, if the drum doesn’t spin but the motor is running, it’s likely a drive belt issue.

How do I unclog a dryer vent?

To unclog a dryer vent, you’ll need to disconnect the vent from the back of the dryer and use a vent brush or vacuum hose to remove the lint buildup. Always remember to reconnect the vent tightly and secure it with a clamp.

How do I know if the motor is burnt out?

If the dryer motor is burnt out, the dryer won’t turn on at all, even though it’s plugged in and the door is closed. You might also smell a burning smell or see smoke coming from the dryer. If suspected, it’s best to call a professional for safety reasons.

What if the drum rollers and axles are damaged?

If the drum rollers and axles are damaged, you’ll likely hear a squealing or thumping noise when the dryer is running. You’ll need to replace them to fix the issue. Always replace all rollers at the same time to ensure balanced drum rotation.

Leave a Comment

Your email address will not be published. Required fields are marked *