Home AppliancesWasher

How To Reset Milnor Washer

Washing Machine 12

The Milnor Washer, a product of the Pellerin Milnor Corporation, is a widely used commercial and industrial laundry equipment designed to cater to a variety of industries and applications. Known for its advanced controls, efficient water usage, dynamically tuned suspension, and reversing washing action, the Milnor Washer is a versatile and efficient appliance. However, like any other machine, it may encounter issues that require a reset for optimal performance. This article provides a comprehensive guide on how to reset a Milnor Washer.


Resetting a Milnor Washer involves a few steps. First, locate the control panel and press the “Terminate” button to clear any errors. If the door is locked, press and hold the “Door Unlock” button. Open the door, check for any issues, then close and lock the door. Select the desired formula using the formula selection buttons and start the washer by pressing the appropriate button on the control panel. If issues persist, consult the relevant manual or contact Milnor’s technical support.

Why Might You Need to Reset a Milnor Washer?

There are several reasons why you might need to reset a Milnor Washer. These include error conditions, a tripped vibration switch, or inverter faults. Resetting the washer can help clear these issues and restore the machine to its normal operation. However, if the problem persists after resetting, it’s advisable to consult the troubleshooting guides provided by Milnor or contact their technical support for further assistance.

Preliminary Steps Before Resetting a Milnor Washer

Before you proceed with resetting your Milnor Washer, ensure you take the following preliminary steps:

  1. Ensure Safety: Make sure everyone working with the washer is aware of the reset process and is following proper safety procedures.
  2. Customize Settings: Check and customize the machine settings according to your specific requirements.
  3. Consult the Manual: Refer to the relevant manual for your specific Milnor Washer model to understand the reset process and any additional steps required.
  4. Complete Ongoing Wash Cycles: If the washer is in the middle of a wash cycle, allow it to finish or terminate the cycle before proceeding with the reset.
  5. Proper Loading: Ensure that the washer is loaded at or near its rated weight capacity before resetting.

How to Reset a Milnor Washer: A Step-by-Step Guide

Resetting a Milnor Washer involves a simple process:

  1. Locate the control panel on the washer with buttons for formula selection, a terminate button, a door unlock button, and indicator lights.
  2. Press the “Terminate” button to clear any error conditions or ongoing processes.
  3. If the door is locked, press and hold the “Door Unlock” button to unlock the door.
  4. Open the door and check for any obstructions or issues that may have caused the washer to stop functioning properly.
  5. Close the door and ensure it is locked securely.
  6. Select the desired formula using the formula selection buttons on the control panel.
  7. Start the washer by pressing the appropriate button on the control panel.

Safety Precautions

Safety should always be a priority when dealing with machinery. Here are some safety precautions to keep in mind when resetting a Milnor Washer:

  1. Know the location of the main machine disconnect and use it in an emergency to remove all electric power from the machine.
  2. Do not service the machine unless qualified and authorized.
  3. Be aware of collision, crushing, and pinch hazards.
  4. Ensure the machine is inspected and serviced in accordance with good practice and the preventive maintenance schedule.

Common Issues and Their Resolutions

Common issues that one might encounter while resetting a Milnor Washer include door/inverter faults, DIP switch issues, and external fault input to the inverter. These issues can be resolved by clearing the error conditions and following the appropriate troubleshooting guide provided in the Milnor schematic book.

Ensuring Correct Functioning After Resetting

After resetting, you can ensure that your Milnor Washer is functioning correctly by checking the washer-extractor controls, performing a visual inspection of the machine, running a test cycle with an empty load, ensuring the door interlock is functioning correctly, and checking the coin mechanism (if applicable).

In conclusion, resetting a Milnor Washer is a simple process that can help restore the appliance to its optimal performance. However, always remember to follow the manufacturer’s guidelines and instructions when resetting the appliance to avoid any potential negative impacts. If you encounter any issues that you cannot resolve, don’t hesitate to reach out to Milnor’s technical support or your local authorized service provider for assistance.

Frequently Asked Questions

What is the “Terminate” button on the Milnor Washer?

The “Terminate” button on the Milnor Washer is a control feature that allows the user to stop any ongoing processes or clear any error conditions. It aids in resetting the washer to its default state.

How can I identify the specific error causing problems in my Milnor Washer?

The Milnor Washer comes equipped with an advanced control system that displays specific error codes when a problem arises. You can refer to these codes and consult the Milnor Washer manual or troubleshooting guide to identify the specific error.

Do I need to unload the washer before resetting?

It is recommended to unload the washer before resetting to avoid any potential damage to the clothes. However, if the washer is loaded at or near its rated weight capacity, you may proceed with the reset process.

How often should I reset my Milnor Washer?

The need to reset your Milnor Washer depends on the occurrence of error conditions or faults. Regular maintenance and proper use can minimize the need for frequent resetting.

Can I reset my Milnor Washer during a power outage?

No, resetting a Milnor Washer requires power as the process involves using the control panel. If there is a power outage, you will need to wait until power is restored to reset the washer.

What should I do if the door of the Milnor Washer won’t unlock after pressing the “Door Unlock” button?

If the door doesn’t unlock after pressing the “Door Unlock” button, there may be a mechanical issue. In such cases, it is advisable to contact Milnor’s technical support or your local authorized service provider for assistance.

Leave a Comment

Your email address will not be published. Required fields are marked *