Midea washing machines are programmed to show various error codes on their display to tell you when something is wrong. However, keeping track of them all can be tough because there are many codes.
However, one of the most common codes you might encounter is the ”E4” error code. Because every washing machine differs, the ”E4” code might change meaning from washer to washer.
In this short guide, we are going through the meaning and what you can do to resolve the problem.
- Depending on your Midea washer model, the E4 error code could pertain to different issues.
- In front-load washers, E4 could point to problems with the water temperature sensor.
- Top-load washers could display the E4 error code when the load is unbalanced.
- A low water supply might also cause the E4 error message.
- Call a professional if none of these reasons apply to your situation.
Midea washing machines come in a wide variety of models. For this reason, error codes do not remain the same across every unit.
Depending on your model, a flashing E4 code on display could mean something entirely different from other Midea washers.
What Does ”E4” Mean on a Midea Washer?
Midea will usually provide a list of error codes in the user manual to help you troubleshoot your washing machine when it runs into an error.
Before you consider the following explanations, try to check your manual first. It should provide more specific insight into the different error messages that your washer model might display.
1. Water Temperature Sensor Malfunction
If you’ve got a front-load Midea washer, a blinking E4 error code could signify a problem with the water temperature sensor.
This sensor detects the water temperature in your washer, allowing the unit to adjust automatically to meet your cycle’s requirements.
When the sensor is damaged or malfunctioning, your Midea washer will display the ”E4” error code. It might also refuse to operate until the error is resolved.
How To Fix It: The first step would be to check if the sensor was somehow detached from its connection to the printed circuit board. If it was, reconnecting the sensor can restore its function.
If it has failed, you may have to replace the sensor. If neither of these options works, then the problem might be associated with the printed circuit board.
Remember that fixing a temperature sensor is not something you can do on your own.
Call a professional to inspect and repair your Midea washer if you suspect the sensor or the printed circuit board is the main culprit.
2. Unbalanced Load
When your laundry piles up on one side of your top-load washer, it causes the tub to lean closer to the housing. As the cycle continues, the unbalanced weight could cause the tub to hit the metal casing, causing loud noises or damage.
This uneven weight could also apply unnecessary pressure on specific parts of the washer, leading to wear and tear.
How To Fix It: Most washing machines will not continue the cycle unless the unbalanced load is evened out. You can do this by opening the lid and moving your laundry around.
Some washers will automatically stop the cycle and fill the tub with water as it attempts to distribute the weight evenly.
3. Insufficient Water Flow
Your Midea washer, much like machines from other brands, detects how much water flows into the tub.
When it notices that the water pressure or flow is too low to fill the tank, it will stop the cycle and display the E4 error code on the screen.
How To Fix It: Check if the hose is properly connected. Sometimes, a dirty hose may become blocked on the inside by accumulated dirt.
Twists and coils in the hose could also impede water flow. If there are no problems with the hose, you might have to check for water pressure issues in your home plumbing.
Takeaway
Midea washing machines can display the E4 error code for several reasons depending on your specific model. So if you don’t have your user manual handy, check to see if any of these possibilities apply to your machine.
If not, you should contact Midea’s customer support line to find out what might be causing the E4 error on your washer.
Frequently Asked Questions
How Do I Reset My Midea Washer?
Minor errors with your Midea washer could be resolved with a simple reset. To do this, turn off the washer for 30 seconds to 1 minute.
This clears the washer’s memory and reboots the system so you can start a new cycle. Unplugging the unit to disable its auto restart function is ideal to guarantee that the reset works.
How To Improve Water Flow Into Your Washer?
If there isn’t enough water entering your washing machine, there are a few things you could do to help improve the flow, including the following:
- First, check if the hose is obstructed, coiled, or folded.
- If the hose is old, cracked, or leaking, replace it with a new hose.
- Make sure the valves are opened all the way.
- Turn off other faucets that could reduce water flow into your washer.
- Finally, see that all water connections are tight and secure.
