Home AppliancesDishwasher

How To Turn Off Bosch Dishwasher E15

Dishwasher 30

The E15 error code on a Bosch dishwasher is a common issue that many users encounter. It indicates that the safety switch has detected water in the base of the dishwasher, activating the leakage protection system. This comprehensive guide will walk you through the steps to turn off the Bosch Dishwasher E15 error code and offers preventive measures to avoid such issues in the future.


To turn off the Bosch Dishwasher E15 error code, first, perform a hard reset by disconnecting the power to the dishwasher for five minutes. If the error persists, try the tilt method, which involves tilting the dishwasher at a 45-degree angle to drain out any water from the base. If these steps don’t resolve the issue, it’s advisable to seek professional assistance.

What Does the E15 Error Code Mean?

The E15 error code on a Bosch dishwasher signifies water leakage in the base of the dishwasher. This can be caused by a leak in the dishwasher or an external source of water, such as a sink overflow. It can also be due to a glitch in the control board.

How to Turn Off Bosch Dishwasher E15?

Perform a Hard Reset

The first step to rectify the E15 error is to perform a hard reset. Disconnect the power to the dishwasher for five minutes. This can often clear the error if it was caused by a glitch.

The Tilt Method

If the error code returns, you can try the tilt method. Carefully tilt the dishwasher at a 45-degree angle to allow the water to drain out from the base. After draining the water, place the dishwasher back in its original position and reconnect the power.

Tools Needed

To rectify the E15 error code, you will need the following tools:

  1. A towel or cloth to soak up any water in the base of the dishwasher.
  2. A screwdriver to remove the dishwasher’s front panel and kickplate.

Risks of Ignoring the E15 Error Code

Ignoring the E15 error code can lead to several potential risks:

  1. Water damage
  2. Electrical hazards
  3. Reduced dishwasher performance
  4. Safety concerns
  5. Further damage to the dishwasher

Preventive Measures

To avoid the E15 error on a Bosch dishwasher, follow these preventive measures:

  1. Regularly inspect and clean the dishwasher filter.
  2. Check for leaks.
  3. Maintain the dishwasher.
  4. Use the correct detergent.
  5. Load the dishwasher properly.

Professional Assistance

If the E15 error persists after troubleshooting, it is advisable to seek professional assistance. Bosch recommends contacting their customer support at 1-800-944-2904.

In conclusion, the E15 error code on a Bosch dishwasher can often be rectified with a few simple steps. However, it’s essential to identify and fix the cause of the water leakage to prevent the error code from reappearing and avoid further damage to the dishwasher or your home.

Frequently Asked Questions

What other error codes can I encounter with a Bosch dishwasher?

Bosch dishwashers can display several error codes such as E01, E02, E09, E15, E22, E24, E25, among others. Each code signifies a different issue, for instance, E01 indicates a heating problem, E02 signifies a temperature sensor issue, and E24 suggests a drainage problem.

How long should I tilt the dishwasher for the water to drain?

There’s no set time for how long you should tilt the dishwasher. Keep it tilted until you no longer see water draining from the base. This could take anywhere from a few seconds to a couple of minutes.

Is it safe to perform these troubleshooting steps on my own?

While these steps are generally safe to perform, ensure to disconnect the power supply to the dishwasher before starting. If you’re not comfortable doing it yourself or if the issue persists, it’s recommended to seek professional help.

What type of detergent should I use in my Bosch dishwasher?

Bosch recommends using detergents specifically designed for automatic dishwashers. Avoid using hand dishwashing detergents as they produce too many suds which can damage the machine.

How often should I clean the dishwasher filter?

It’s recommended to clean the dishwasher filter once a month to maintain optimal performance. However, if your dishwasher is heavily used or you notice a decrease in cleaning performance, you might need to clean it more frequently.

Leave a Comment

Your email address will not be published. Required fields are marked *