How To Reset Floodstop Washing Machine

The Floodstop Washing Machine system is a convenient device designed to protect your home from potential water damage caused by a leaking or flooding washing machine. However, like any other appliance, it may require resetting from time to time. Whether you are dealing with false alarms, air in the water lines, or leak sensor issues, this guide will provide you with comprehensive instructions on how to reset your Floodstop Washing Machine.

Understanding the Floodstop Washing Machine

Before we dive into the resetting process, it’s important to understand what a Floodstop Washing Machine system is and how it functions. This device is designed to automatically shut off the water supply to your washing machine when it detects a leak.

The system comprises motorized ball valves, a control unit, and a water/leak sensor. The motorized ball valves are installed on the hot and cold water hose bibs of your washing machine. The water/leak sensor is placed on the floor behind the washing machine. The system remains open until the sensor detects water on the floor, upon which the FloodStop valves immediately close, and an alarm is sounded. The valves will stay closed until the issue is resolved and the system is reset.

When to Reset Your Floodstop Washing Machine

Resetting your Floodstop Washing Machine is needed when the system has detected a water leak and automatically shut off the water supply to prevent flooding and potential damage. Once the problem causing the leak has been fixed, you will need to reset the system to return it to its normal operation.

Step-by-Step Guide to Resetting Your Floodstop Washing Machine

Resetting your Floodstop Washing Machine is a straightforward process. Here are the steps you need to follow:

1. Start by turning off the water supply at the manual shut-off valves.
2. Ensure that the issue causing the leak has been resolved.
3. Wipe the sensors dry.
4. Press the green “open” button on the control unit.

By following these steps, you should be able to reset your Floodstop Washing Machine system. However, if the problem persists, it’s advisable to consult the user manual or contact the manufacturer for further assistance.

Troubleshooting Tips

If the resetting process does not resolve the issue, you might need to try a few troubleshooting tips:

1. Check the water sensor: Ensure the sensor is clean and dry. If it’s dirty or damp, wipe it off and keep it away from any conductive materials.
2. Adjust the water sensor sensitivity: If the issue persists, try adjusting the water sensor sensitivity button by turning it slightly clockwise.
3. Mute the alarm: If the Floodstop alarm is going off, press the mute button to stop it.
4. Check the power source: Make sure the device is connected to a power source, either through an AC adapter or batteries.
5. Inspect the connections: Ensure that all connections, including the sensor cords and the valve, are properly connected.
6. Replace the batteries: If the device is running on battery power, try replacing the batteries.

If none of these steps resolves the issue, the Floodstop device may be faulty, and you might need to replace it.

Maintaining Your Floodstop Washing Machine

Proper maintenance of your Floodstop Washing Machine system can reduce the need for resetting. Here are some maintenance tips:

1. Install the Floodstop Valves correctly: Ensure the Floodstop Valves are installed directly to your existing valves. Hand tighten the Floodstop Valves to the manual shut-off valves, making sure not to over-tighten the connections.
2. Position the Leak Sensor properly: Place the Leak Sensor on the floor behind the washing machine, ensuring it is not in contact with any metal surfaces.
3. Test the Floodstop System periodically: Wet the Leak Sensor to ensure it signals the Floodstop Valve to close and triggers the audible alarm. Push the Mute button to silence the alarm and the Open button to reopen the valve.
4. Keep the Leak Sensor clean and dry: Make sure both sides of the Leak Sensor are dry when not in use. If the Paper Sleeve on the Leak Sensor becomes unusable, you can replace it with a paper towel.
5. Check for leaks regularly: Inspect the connections between the Floodstop Valves, washing machine hoses, and manual shut-off valves for any signs of leaks. Tighten the connections if necessary, but avoid over-tightening.

By following these maintenance steps, you can ensure the proper functioning of your Floodstop Washing Machine system and reduce the need for resetting.

Conclusion

Resetting your Floodstop Washing Machine system is a simple process that can be done following a few straightforward steps. However, if the issue persists even after resetting, it’s advisable to seek professional help or contact the manufacturer. Regular maintenance and proper installation can also help ensure that your Floodstop system functions efficiently and effectively to protect your home from potential water damage caused by a leaking washing machine.