Replacing the water filter in your Fisher & Paykel fridge is a simple, straightforward task that you can do on your own. This comprehensive guide will walk you through the process step by step, provide you with safety precautions, and answer some common questions about water filters.
To replace the water filter on a Fisher & Paykel fridge, locate the filter usually at the back top right corner of the fridge. Place a towel underneath, hold the base of the filter, pull and rotate it counterclockwise to remove. Unwrap the new filter, align and insert it into the filter head, pushing back into the bracket. After installation, flush the filter by dispensing water. Finally, reset the water filter indicator by pressing the ‘Bell Icon’ and ‘Plus Icon’ simultaneously for 4 seconds.
Locating the Water Filter
The first step in replacing your water filter is locating it. In most Fisher & Paykel fridges, the filter is located internally at the back top right corner of the refrigerator. For other models, the filter may be located externally at the rear of the refrigerator.
Removing the Old Filter
Before you remove the old filter, place a dish towel underneath the filter to catch any water that may come out. Hold the base of the filter firmly and pull it towards you. The filter will tilt towards you from the bracket. Rotate the filter counterclockwise until it releases from the filter head. If the filter is difficult to remove, you can run water through the filter by dispensing water.
Installing the New Filter
Remove the plastic wrapping from the new filter. Align the filter correctly and insert it into the filter head. Push the entire filter back into the bracket. Rotate the new filter into the filter head while pushing it until it gets locked. Pull once to check if it’s securely placed.
Flushing the Filter
After installation, the water filter must be flushed. This can be done by dispensing some water. The water filter will reach optimum performance after four to five full bins of ice.
Resetting the Water Filter Indicator
Once you are done replacing the filter, you need to reset the Fisher and Paykel water filter indicator. Press the ‘Bell Icon’ and ‘Plus Icon’ simultaneously for 4 seconds. The filter change indicator will automatically turn off once the reset is complete.
When replacing a water filter, several safety precautions should be taken. These include not turning off the water supply when removing or installing the filter, flushing the filter after installation, using the water filter as soon as possible after installation, and only connecting your water filter to safe drinking water.
Choosing the Right Filter
Different types of water filters are available in the market, each designed to address specific water-related issues. Understanding your water quality, determining what contaminants you want to remove, considering the type of filter that suits your needs and lifestyle, and ensuring the filter is certified by a reputable organization will help you choose the right filter for your home.
Replacing the water filter in your Fisher & Paykel fridge is a simple task that can be accomplished in a few minutes. Remember to follow the manufacturer’s instructions and take all necessary safety precautions. With this comprehensive guide, you should be well-equipped to replace your water filter with ease.
Frequently Asked Questions
How often should I replace the water filter in my Fisher & Paykel fridge?
It’s generally recommended to replace your fridge’s water filter every six months. However, if your water usage is high or if you notice changes in the taste or smell of the water, you may need to replace it more frequently.
What if the water filter indicator doesn’t reset after pressing the ‘Bell Icon’ and ‘Plus Icon’?
If the water filter indicator doesn’t reset after following the given instructions, try unplugging the fridge for one minute and then plug it back in. If the problem persists, you may need to contact Fisher & Paykel customer service.
Can I use any water filter in my Fisher & Paykel fridge?
No, not all water filters are compatible with Fisher & Paykel fridges. Ensure you’re using a Fisher & Paykel approved water filter. Using an unapproved water filter could cause damage to your fridge and void your warranty.
What does it mean if the water tastes weird after installing a new filter?
If the water tastes weird after installing a new filter, it might be because the filter hasn’t been flushed properly. Try running four to five full bins of water through the filter. If the taste persists, contact Fisher & Paykel customer service.
Can I clean and reuse my old water filter?
No, once a water filter is used, it traps and holds the contaminants from your water. Cleaning will not fully remove these contaminants and could lead to poor water quality. It’s better to replace the filter with a new one when it’s time.