Home AppliancesDishwasher

How To Remove a Bosch Integrated Dishwasher

Dishwasher 8

When it comes to home appliances, the Bosch integrated dishwasher is a popular choice among homeowners due to its sleek design and efficient performance. However, there may come a time when you need to remove this appliance, either for repair, replacement, or redesigning your kitchen. This comprehensive guide will walk you through the detailed process of removing a Bosch integrated dishwasher safely and efficiently.


To remove a Bosch integrated dishwasher, first disconnect the appliance from the power supply and empty it. Remove any water inside and detach the door panel. Locate and remove the mounting screws. Gather necessary tools such as a screwdriver, nutdriver, adjustable wrench, level, pliers, tape measure, safety glasses, flashlight, bucket, and gloves. Disconnect the power and water supply. Remove the mounting brackets and carefully slide the dishwasher out. Always prioritize safety and consider hiring a professional if unsure.

Preparing for Removal

Before getting started with the removal process, it’s crucial to take some initial steps to ensure safety and prevent damage to your appliance or home.

  • Turn off the power: Disconnect the dishwasher from the mains power supply. This step is crucial to avoid any electrical accidents during the removal process.
  • Empty the dishwasher: Ensure there are no dishes or utensils left inside the dishwasher.
  • Remove any water inside: Run the dishwasher for about three to five minutes and then cancel the cycle to drain any water inside. Alternatively, you can manually remove any standing water using a wet-dry vacuum.
  • Detach the door panel: Some Bosch dishwashers have a custom door panel. If yours does, you’ll need to remove it. Check your installation guide or the Bosch website for specific instructions.
  • Locate and remove mounting screws: Open the dishwasher door and look at the top corners of the dishwasher. There should be a screw on each side holding the dishwasher to the cabinet. Remove these screws with a Phillips head screwdriver.

Tools Required

Before you start the removal process, gather the necessary tools. You will need:

  1. Phillips head screwdriver
  2. 5/16″ and 1/4″ nutdriver
  3. 6″ adjustable wrench
  4. Level
  5. Pliers
  6. Tape measure
  7. Safety glasses
  8. Flashlight
  9. Bucket (to catch water when disconnecting hoses)
  10. Gloves

Disconnecting Power and Water Supply

Once you’ve prepared and gathered your tools, you can start disconnecting the dishwasher from the power and water supply.

  • Disconnect the power: Bosch dishwashers are connected to the power source through an electrical line from a dedicated circuit at the main breaker. To safely disconnect it, either unplug it or turn off the circuit breaker.
  • Turn off and disconnect the water supply: Locate the water supply valve, usually found underneath the sink, and turn it off. Then, disconnect the water supply line from the dishwasher using an adjustable wrench.

Removing the Dishwasher

With the power and water disconnected, you can now remove the dishwasher from the cabinetry.

  1. Remove the mounting brackets: Locate the mounting brackets on the front corners of the dishwasher. Unscrew the brackets from the countertop or cabinet sides.
  2. Carefully slide the dishwasher out: Gently pull the dishwasher out from the cabinetry, being cautious of any remaining connections or sharp edges.

Remember to handle the dishwasher carefully as it is a heavy appliance. If you’re unsure or uncomfortable with any part of the process, consider hiring a professional.


Once you’ve successfully removed your Bosch integrated dishwasher, you can either recycle, sell, donate, or store the dishwasher. If you plan to reinstall it in the future, make sure to store it in a safe and dry place.

Safety Precautions

Throughout the removal process, always prioritize safety. Wear gloves and safety glasses, use proper lifting techniques, and never attempt to force the dishwasher out of its space.

In conclusion, removing a Bosch integrated dishwasher is a manageable task if you take the time to prepare, gather the right tools, and follow the steps carefully. Always remember to prioritize safety and don’t hesitate to seek professional help if needed.

Frequently Asked Questions

Do I need to disconnect the drain hose from the dishwasher too?

Yes, you should disconnect the drain hose. It’s typically connected to the air gap, garbage disposal, or sink drain. Be prepared for some water to come out when you disconnect it.

How can I protect my floors while removing the dishwasher?

You can protect your floors by laying down a protective layer such as a drop cloth or old towels before sliding out the dishwasher. This can help prevent scratches and absorb any water that might spill.

What should I do if the dishwasher is stuck and won’t slide out?

If the dishwasher won’t slide out, it may still be connected to the cabinet, power, or water supply. Double-check all connections have been disconnected. If it’s still stuck, it might be due to the adjustable feet at the bottom. Try lowering them or seek professional help.

What should I do with the old water supply line and power cord?

If you’re replacing the dishwasher, it’s advisable to use new water and power connections for safety and efficiency, so you can recycle the old ones. If you’re reinstalling the same dishwasher, you can reuse them if they’re in good condition.

Can I remove a Bosch integrated dishwasher by myself?

Yes, it’s possible to remove the dishwasher by yourself, but you should be cautious due to the weight of the appliance. If you’re not comfortable or sure about the process, it’s best to hire a professional to avoid injury or damage.

Leave a Comment

Your email address will not be published. Required fields are marked *