Home AppliancesVacuum Cleaner

How To Reset a Shark Vacuum

Shark Vacuum Filter That Is Full Of Dog Fur

Vacuums are one of the most common devices to have around the house. Most owners prefer Shark cleaners for their versatility, performance, and excellent cleaning ability.

However, when the appliance starts acting up, resetting might be inevitable.

It is not uncommon for a vacuum cleaner to run into some issues during operations. Resetting your Shark is one of the easiest methods to troubleshoot the unit and get it working efficiently again.

This article will look at a few ways to reset various types of Shark vacuum cleaners in the market.


The resetting procedure for a Shark vacuum depends on the model you own. For corded vacuums, unplug the device and wait a few minutes before plugging it back into the outlet.

Afterward, press and hold the power button for 10 seconds, and then turn on the unit.

On the other hand, if you own a cordless Shark device, you only need to hold down the power button for 10 seconds and then turn on the vacuum.

Smart robot vacuums have two resetting procedures. You can use the mobile app to factory reset the unit or manually reset the device by pressing and holding the power button for 10 seconds.

Regular maintenance ensures your vacuum cleaner performs efficiently, preventing expensive repairs and enhancing its durability.

Reasons for Resetting Your Vacuum Cleaner

Resetting your Shark vacuum can help solve most issues caused by a software or hardware malfunction.

Here are some of the reasons for resetting your vacuum:

1. Vacuum Thermostat Has Problems

Woman In Jeans Shirt And Shorts Vacuum Cleaning A Carpet

You might not know that Shark vacuums have a thermostat. The thermostat protects the motor from overheating when the unit is running.

When the motor starts overheating, the thermostat will break the electrical circuit and cause the cleaner to shut off.

2. The Motor Has an Error

Professional Technician Repairs Vacuum Cleaner

Additionally, a malfunctioning suction motor needs to be reset. The motor creates the vacuum pressure required to pull in all the dirt and dust around the house.

However, overheating can cause the motor to lose speed, affecting its vacuum pressure and rate of airflow.

3. Clogged Filters

Close Up Of Massively Clogged, Dirty Filter Of Hand Vacuum Cleaner

Additionally, after cleaning clogged filters, it is important to reset your Shark unit. Clogged filters reduce suction performance in the vacuum, leading to the unit overworking.

Resetting the appliance after cleaning the air filters can help clear any errors in the unit and improve its efficiency.

4. Brush Rollers Not Working Properly

Changing Dirty Soft Roller Cleaner Head Of Vacuum Cleaner

Resetting the cleaner can also ensure its brush rollers rotate properly. Some Shark vacuum models have added brush rollers to enhance their cleaning ability.

The rollers swipe up any large particles and debris around surfaces.

5. Vacuum Cleaner Does Not Connect to Wi-Fi

Young Woman Using A Vacuum Cleaner While Cleaning Carpet In The House

If you own a smart Shark vacuum like the ION, AI, or IQ Robot, it is common for the unit to lose connection around the house.

However, if you are having an issue reconnecting the cleaner to a strong Wi-Fi signal, you might need to reset the device.

6. Clear Any Software Malfunctions

Young Woman Uses Cordless Vacuum Cleaner To Clean Home Carpet

Lastly, resetting your appliance is a good way to clear software errors. If you notice that your Shark Wandvac is acting weird, it might be caused by a problem with saved programming, software, or memory.

When this happens, resetting the unit can help clear the errors and restore normal functionality.

How To Reset a Shark Vacuum Cleaner

Woman Cleaning Floor With Cordless Vacuum Cleaner

If you are experiencing glitches with your vacuuming cleaner, resetting the unit is best before calling a repair professional.

However, the resetting procedure type depends on the Shark vacuum you own.

Whichever Shark model you own, let us look at the simple resetting procedures and how to get your appliance working optimally.

Helpful Tip

If you have trouble resetting your Shark vacuum cleaner, check the user manual or contact customer care for help.

Resetting a Shark Corded Vacuum Cleaner

Removing Dirt From Soft Carpet With Vacuum Cleaner

The most common Shark vacuum in most homes is the corded unit.

Units like the Stratos Upright, Rotator Lift-Away, and Navigator Lift-Away are affordable cleaners effective when cleaning dust and pollen around the house.

Though corded vacuums are more traditional, they have a bigger dirt-holding capacity, reducing the number of trips to empty the trash.

If you notice that your corded Shark vacuum is acting up, resetting can help fix minor errors within the device.

Here is a safety guide on safely resetting your unit and restoring normal functions in your cleaner:

1. Unplug the Vacuum Cleaner

The first thing you need to do is unplug the cleaner from the wall outlet.

2. Replug the Device

Please wait at least 5 minutes before plugging it back into the outlet.

3. Press Down the Vacuum Button

Find the power button on the device and hold it down for about 10 seconds.

4. Turn On the Vacuum

Finally, you only need to turn your Shark Rocket pro back on. This should reset the appliance and restore its factory settings.

If you followed this procedure keenly, and your vacuum cleaner still gives you trouble, the best thing to do is contact customer service or a repair technician.

Resetting a Shark Cordless Vacuum Cleaner

Young Man Cleaning Blue Carpet With Vacuum Cleaner At Home

Cordless Shark vacuums, like the Cordless Pet Plus, Navigator Freestyle, or Wandvac Handheld, use a rechargeable battery pack, making it easier to move around the house without worrying about the cord.

Furthermore, because the units have a smaller capacity, they are lighter and smaller than traditional cleaners. If you are thinking of resetting your Shark cordless vacuum, follow these simple steps:

1. Turn Off the Vacuum

When resetting a cordless Shark unit, locate the power button and turn off the device.

2. Press and Hold the Power Button

After the appliance powers down, you must press and hold the power button for about 10 seconds. This should help drain any stored charges or errors within the Shark Vertex Pro vacuum.

3. Restart the Vacuum

Try restarting the vacuum cleaner and test to see if its performance has improved.

Resetting a Shark Robot Vacuum

Robots Vacuums Cleaners On Carpet In Living Room For Cleaning Pet Hair And Dust

Smart vacuums are some of the most common smart home appliances. Shark also has a line of robotic vacuums, like the RV, Ai, IQ, or ION.

These smart devices are excellent if you want to reduce chores while keeping your house clean.

Robotic vacuums like the Shark ION swipe up dirt and debris around the house. The smart devices map out rooms and collect dirt and debris on the floor without a hassle.

Likewise, robot vacuum cleaners are much quieter than traditional ones.

If you need to clear up any errors on your smart vacuum devices, here are a few ways you can do it:

1. Using the SharkClean App

Using their mobile app is one of the most convenient ways to reset your Shark robot vacuum.

Because the device is connected using Wi-Fi, you can access the vacuum remotely, including rescheduling, cleaning, or even resetting your vacuum.

To reset your Shark robot vacuum, all you need to do is:

  • Launch the SharkClean App on your phone or tablet.
  • Navigate to the settings section.
  • Select the “Factory Reset” option.
  • Confirm you want to factory reset the Shark vacuum.
  • Wait for a few seconds to a minute as the device resets.
  • If the vacuum successfully resets, it should disconnect from your app.
Resetting Using the Mobile App

An important thing to note is that you will lose all your robot’s settings, including the saved mapping data, cleaning schedules, and Wi-Fi settings.

2. Manually Reset the Shark Robot Vacuum

Likewise, you can manually reset the smart Shark vacuum. However, a manual reset only partially resets the unit, and you will not lose any saved cloud settings like your cleaning schedule.

Here is how to safely reset your Shark robot manually:

  • Find the power switch on the vacuum cleaner.
  • Turn the power switch off for 10 seconds.
  • Switch the Shark vacuum back on.
  • It should take about a minute before the device connects to your Wi-Fi.


Resetting a Shark vacuum is a good way to troubleshoot and clear any errors in the device. However, the model of your Shark vacuum can determine the resetting procedure to use.

You should unplug the unit for corded units and wait about 5 minutes before replugging it back into the outlet. Afterward, press the power button for 10 seconds, then turn the unit back on.

Likewise, resetting cordless units should not give you any trouble either. All you need to do is press the power button and wait 10 seconds.

Lastly, you can use the mobile app to reset the factory settings or manually reset the unit for Shark robot vacuums.

Frequently Asked Questions

Does a Shark Vacuum Have a Reset Button?

Shark vacuums do not have a reset button. However, if you need to reset your device, all you need to do is switch off the power button for 10 seconds, then turn it back on.

Why Is My Shark Robot Stopping or Beeping?

In most cases, smart Shark vacuums stop or beep if they are stuck and cannot move or if something clogs up the main brush roller.

Leave a Comment

Your email address will not be published. Required fields are marked *