Are you looking to reset the filter on your Frigidaire refrigerator, but aren’t quite sure how to get it done? You’re in the right place. This article will provide an in-depth guide on how to reset the filter on your Frigidaire refrigerator, including step-by-step instructions, common issues, and preventative measures.
To reset the filter on a Frigidaire refrigerator, start by replacing the refrigerator’s air and water filters. Then, locate the options button on the control panel and tap it. Scroll down to the water filter option and press and hold the set button until it starts flashing and stops. This will reset the water filter indicator. Repeat the same process for the air filter option. This will reset the air filter indicator. After these steps, both filter indicator lights should be reset.
Why Reset Your Refrigerator Filter?
Resetting the filter on your refrigerator is crucial to maintaining the quality and safety of your drinking water. Over time, filters can become clogged with contaminants and particles, which can affect the taste, smell, and safety of your water.
Frigidaire recommends replacing your refrigerator’s water filter every six months or sooner if the status light is flashing. After replacing the filter, it’s necessary to reset the filter indicator light.
How to Reset the Filter on a Frigidaire Refrigerator
Step 1: Ensure that you have already replaced the refrigerator air filter and water filter.
Step 2: Locate the options button on the refrigerator’s control panel and tap it.
Step 3: Scroll down to the water filter option.
Step 4: Press and hold the set button until it starts flashing and stops. This will reset the water filter indicator.
Step 5: Next, scroll down to the air filter option.
Step 6: Press and hold the set button again and release it when it starts flashing and stops. This will reset the air filter indicator.
After completing these steps, the indicator lights for both filters should be reset, and you won’t see them again for another six months or until it’s time to replace the filters again.
Common Mistakes and How to Avoid Them
Here are some common mistakes people make while resetting filters and how to avoid them:
- Using the incorrect filter size: Always ensure you use the correct filter size for your system.
- Installing the filter in the wrong direction: Look for the printed arrows on the side of the filter to show you the correct way to install it.
- Forgetting to replace dirty filters: Establish a regular schedule for replacing filters and check them periodically for signs of dirt and wear.
- Not resetting the filter status light: After changing the water filter in a refrigerator, for example, you need to reset the filter status light. Consult your appliance’s owner’s manual for specific instructions on how to reset the filter status light for your model.
Potential Issues if the Filter is Not Reset Properly
If the filter is not reset properly or on time, several potential issues may occur, including higher energy bills, health concerns, system inefficiency, serious compressor damage, frozen coils, and repair or replacement bills.
To avoid these issues, it is essential to reset the filter properly and replace it as recommended by the manufacturer or at least every 6 to 9 months.
Conclusion
Resetting the filter on your Frigidaire refrigerator is a simple process that can have a significant impact on the quality of your drinking water and the efficiency of your appliance. By following the steps outlined in this guide, you can ensure that your refrigerator continues to provide clean, fresh-tasting water and ice for you and your family.
Remember, if you encounter issues with resetting the filter, you can try re-installing it correctly, pressing and holding the reset button, or power cycling the device. If problems persist, consult a professional for further assistance.
Frequently Asked Questions
How do I know when it’s time to replace my refrigerator’s filter?
Most refrigerators have a filter indicator light that signals when it’s time to change the filter. For Frigidaire refrigerators, the status light will flash when it’s time to replace the filter. Also, Frigidaire recommends replacing your refrigerator’s water filter every six months, or sooner if you notice a decrease in water flow or a change in taste or odor in your water.
Can I use any brand of filter for my Frigidaire refrigerator?
It’s best to use Frigidaire brand filters for your Frigidaire refrigerator. Using other brands may not ensure the same quality of water purification and could potentially cause damage to your refrigerator. Always check your refrigerator’s user manual for specific filter requirements.
What happens if I don’t reset the filter indicator light after changing the filter?
If you don’t reset the filter indicator light after changing the filter, the light will continue to flash. This can be misleading as the flashing light is designed to alert you when it’s time to replace the filter. If the light is always flashing, you might overlook the need for a new filter when the time comes.
Is it difficult to replace and reset the filter on my own? Do I need to hire a professional?
Replacing and resetting the filter on a Frigidaire refrigerator is a relatively simple task that most people can do on their own. The steps are straightforward and usually don’t require any special tools. However, if you’re uncomfortable doing it yourself or encounter issues, it’s always a good idea to consult a professional.
